|
|
|
 So we developed AI... it figured out the clue... already... made itself accordingly... and is currently walking to the peachtree regional if you find him ask him what the objectives are, we'd sure like to know! - Collmandoman [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
21-12-2005, 14:45
|
|||||
|
|||||
Re: White Paper Discuss: Team 33 Four Speed Transmission
Team 971 is building the transmission for machining practice, and we've found a part in the inventor files that isn't listed in the BOM. It is an extention comming off of gears C and G (highlighted by red arrows in the picture below), and no one on our team can figure out where it's comming from. Also, as indicated in the CAD files, the outer diameter of this "mystery part" is set to 3/5 inches...which is not a very common diameter, to say the least. Any help on this is greatly appreciated
-Nuttyman54 and Team 971  
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| White Paper Discuss: Team 188 Woburn Robotics 2004 Gearbox Design Report | CD47-Bot | Extra Discussion | 5 | 17-03-2009 18:45 |
| White Paper Discuss: An Introduction to C Programming for First Robotics Applications | CD47-Bot | Extra Discussion | 10 | 26-11-2004 21:54 |
| White Paper Discuss: 222's 3 Speed Shift-On-The-Fly Transmission | CD47-Bot | Extra Discussion | 4 | 14-07-2004 15:43 |
| White Paper Discuss: Chief Delphi Segway Fundraiser Info | CD47-Bot | Extra Discussion | 1 | 21-06-2004 09:48 |
| White Paper Discuss: 2 speed, Shift-on-the-fly TechnoKat Gearbox | CD47-Bot | Extra Discussion | 35 | 23-01-2004 20:16 |
Threaded Mode