STAMP Scouting Release: Field Overview PDF

[Ethulin]

Originally Posted by Conor Ryan

Just some constructive criticism,
This is really hand, I think that would be helpful to add a few items:

-Show where the incline of the Ramp is, theres a big difference to being on top of the ramp and being on the incline. So that would help a little bit.

-Show more of the goal locations, particularly the center goal and associated trash can.

-Because of the fact that anyone can handle the balls behind the line (only human player can throw a ball over the barrier) you may want to included the marked area on the carpet. This would be helpful because then you could talk about location of people should you need to move balls around behind the barrier.

Other than that, thanks for putting a simple picture of the playing field up.

I really appreciate this, maybe a 1.1 is in the works!

I will add the ramp when I get a chance to do the math, it is a 30 degree decline, so what ever that is from a height of 12in. I am a designer, not a math person! .

I will add the center goal in v1.1.

As for the back area. it WAS their for the betas, but was taken out in the final due to the extra 8 feet making the width constrained to too small an area.

[Ethulin]

Originally Posted by Ethulin

I really appreciate this, maybe a 1.1 is in the works!

I will add the ramp when I get a chance to do the math, it is a 30 degree decline, so what ever that is from a height of 12in. I am a designer, not a math person! .

I will add the center goal in v1.1.

As for the back area. it WAS their for the betas, but was taken out in the final due to the extra 8 feet making the width constrained to too small an area.

So, v1.1 is out!

CHANGELOG:

*Flipped red and blue starting positions (were backwards)
*Moved ramps slightly in for side goals
*Added center goals
*Added ramp for alliance platform
*Added R and B to alliance zones

To download: Go to the STAMP download section

Any comments please post, maybe we can sqeeze a verson 1.2!