14-01-2006, 22:26
|
|
National Instruments
AKA: jhersh
 FRC #2468 (Appreciate) Team Role: Mentor
|
|
Join Date: Nov 2005
Rookie Year: 1997
Location: Austin, TX
Posts: 148
|
|
|
Re: Labview CMUcam demo problem
Quote:
|
Originally Posted by Windward
Currently, I'm trying to get labview to work with the CMU camera. The camera is powered and our serial plug is plugged in, yet when I set the com to comport4 and press run, it does not run. I am not sure what the problem could be. I am not sure what the program demo itself is supposed to do, but I get an error stating there was a problem connecting. The error states that the error could be because of lack of power or a serial connection problem.
But I am pretty sure there is power and it is connected properly.
FYI, we are using a USB to serial converter, which works with the robot controller.
Any advice?
|
Take a look at this post. Try the suggestions there and see if you still have the problems.
Good luck!
-Joe |
we came together, worked our butts off, and eventually looked at failure and decided....its just not our style. - Monochron [more] 
Similar Threads
Hybrid Mode
