Labview CMUcam demo problem

[CmptrGk]

Originally Posted by Windward

Currently, I'm trying to get labview to work with the CMU camera. The camera is powered and our serial plug is plugged in, yet when I set the com to comport4 and press run, it does not run. I am not sure what the problem could be. I am not sure what the program demo itself is supposed to do, but I get an error stating there was a problem connecting. The error states that the error could be because of lack of power or a serial connection problem.

But I am pretty sure there is power and it is connected properly.

FYI, we are using a USB to serial converter, which works with the robot controller.

Any advice?

i had a similar problem, in device settings i changed the port that the converter "was" to com1 and it worked. at least for me the gui wont see anthing above com3