|
Re: help: cannot get the picture in the labVIEW program .. (was: need help!! quickly!)
Quote:
|
Originally Posted by liad
we have connected the camera to the controller andboth lights are on, also we have connected the camera to the pc with the serial connection through com1 and we changed the baud rate to 115200 (basiclly we did everything) but when we try to get the picture in the labVIEW program we dont get it!!!!!! please help us! is it something with the NI VISA?
|
I'm not really clear by your description, so I'll throw this out.
You can not connect the camera to both the RC via the TTL converter board and the DB9 connector to the PC at the same time. The camera is not capable of supporting both at the same time.
Try just connecting the Camera to the RC via the PWM cable/TTL board and the PC to the Programming port on the RC.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
Teams helping teams out is the lifeblood of FIRST. - Koko Ed [more] 
17-01-2006, 13:31
Similar Threads
Threaded Mode