WinXp Registry error during install

[AngelaM]

Originally Posted by eugenebrooks

Is NI-VISA installed by the Labview 8 installation, or do we need to download and install it from the net? If we must download it from the net, which version should we get for Windows XP Pro? There are more versions at this http link than you can shake a stick at...

From the ni.com home page you can select Drivers and Update>> Current Versions which brings you to this page
http://digital.ni.com/softlib.nsf/we...de =132060_US

From here you can find the most current driver versions. You can find NI-VISA under Instrument Connectivity. There you can find the driver for your operating system. Or the following link has the most current driver for Windows XP
http://digital.ni.com/softlib.nsf/we...de =132060_US

If you need DAQmx from the first link you can find Multifunction DAQ under Measurement Hardware. The following link has NI-DAQmx 8.0 for Windows 2000/NT/XP
http://digital.ni.com/softlib.nsf/we...de =132060_US

[Danny Diaz]

Originally Posted by AngelaM

If you need DAQmx from the first link you can find Multifunction DAQ under Measurement Hardware. The following link has NI-DAQmx 8.0 for Windows 2000/NT/XP
http://digital.ni.com/softlib.nsf/we...de =132060_US

If you're looking for a smaller download on the PC, or you're looking to install for a Mac, NI-DAQmx Base also provides the base functionality needed to use the NI USB-6009 DAQ device. If you have other DAQ devices from National Instruments, the DAQmx Full Edition may be required to use the device; check the readme file to determine if your device is supported under DAQmx Base.

-Danny