|
|
|
 Where's the "drill enough weight holes so we're barely under 120lbs" option?
;-) - AlecMataloni [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Where's the "drill enough weight holes so we're barely under 120lbs" option?
;-) - AlecMataloni [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Camera never finds target, stays at "Searching..."
We finally got our robot/camera all set up tonight. I managed to calibrate the camera using LabVIEW, and it tracks consistently through that. However, when I load Kevin's code onto the RC it stays in the "Searching..." mode. I edited all the options in tracking.h, DEBUG goes through all 18 states and then into searching.
Any idea on whats wrong? Thanks, Mike EDIT: I would try the serial port diagnostics program, but our school doesn't give us wireless access, so I can't get it on my programming laptop  Last edited by Mike : 19-01-2006 at 19:26. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How To Use the Google Camera | generalbrando | Kit & Additional Hardware | 2 | 07-02-2006 16:00 |
| Camera pointing error? | Craig Putnam | Programming | 14 | 21-01-2006 02:52 |
| For anyone who doesn't get the camera code..... | Jake M | Programming | 8 | 16-01-2006 18:56 |
| LabVIEW - CMUcam finds target but cant track | bear24rw | Programming | 6 | 13-01-2006 21:43 |
| CMUCam2 Camera Code - Are important parts commented out? | Mr. Lim | Programming | 4 | 14-01-2005 12:11 |
Threaded Mode