|
|
|
 NERDs...gotta collect them all! - Conor Ryan [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| NERDs...gotta collect them all! - Conor Ryan [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Data stream
Does anyone know how they are going to steam the data for amount of teeths from gear-tooth sensor or pan angle to the comp w/o attaching the programming cord to the bot itself? If so plz direct me.
|
|
#2
20-01-2006, 22:19
|
||||
|
||||
|
Re: Data stream
Felix,
I have no idea what you are asking... Mike
|
|
#3
20-01-2006, 22:27
|
||||
|
||||
|
Re: Data stream
OK I know rushing was bad but this is the best I can try to explain it. Is there a way to view the data from the robot(pan angle , gear tooth sensor reading) w/o hooking the programming cord to the comp. I know we can't have a cord connect to the robot during the match
|
|
#4
20-01-2006, 22:47
|
|||||
|
|||||
|
Re: Data stream
the dashboard port on your operator interface allows you to get feedback from your robot during a match
the white pages have some very good programs for sorting out that data from your serial port and putting it in a format you can use as useful feedback these might help: http://www.chiefdelphi.com/forums/sh...dashboard+view http://www.chiefdelphi.com/forums/sh...hboard+program http://www.chiefdelphi.com/forums/sh...ad.php?t=41214 and if you do some digging in the white pages there is a lot more to stir up the idea train work that VB!  Last edited by rufu5 : 20-01-2006 at 22:59.
|
|
#5
20-01-2006, 23:21
|
||||
|
||||
|
Re: Data stream
Quote:
First of all, thanks for the translation... The method Rufus has illuminated is, unfortunately, the only numerical method of getting info to the drivers that I know of. However... If you were to mount a servo on the robot with an indicator pointer large enough to be seen by the drivers... Actually, my team has used this method for digital information (ie: the claw is locked onto the bar, et cetera) when the drivers were unable to take their eyes off of the "action". If however you do not need the data in real time, search for the term "EEPROM" in these fori archives... Good luck, Mike
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| TTL port to a serial port on a demo board | ImmortalAres | Programming | 16 | 09-07-2005 23:44 |
| Updated: Serial Port Driver Code | Kevin Watson | Programming | 4 | 05-02-2005 18:39 |
| heres the code. y this not working | omega | Programming | 16 | 31-03-2004 15:18 |
| Limiting PWM in pbasic | archiver | 2001 | 4 | 24-06-2002 00:38 |
| dashboard data stream | archiver | 2000 | 10 | 23-06-2002 22:56 |
Hybrid Mode
