|
Re: Data stream
Quote:
|
Originally Posted by Nine9cracker
OK I know rushing was bad but this is the best I can try to explain it. Is there a way to view the data from the robot(pan angle , gear tooth sensor reading) w/o hooking the programming cord to the comp. I know we can't have a cord connect to the robot during the match
|
Felix,
First of all, thanks for the translation...
The method Rufus has illuminated is, unfortunately, the only numerical method of getting info to the drivers that I know of. However...
If you were to mount a servo on the robot with an indicator pointer large enough to be seen by the drivers...
Actually, my team has used this method for digital information (ie: the claw is locked onto the bar, et cetera) when the drivers were unable to take their eyes off of the "action".
If however you do not need the data in real time, search for the term "EEPROM" in these fori archives...
Good luck,
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|
If enough students "get it," the team will begin to. And if enough students "get it," the smart ones will seek out all the extra help they can get. That's how I found Chiefdelphi... - Joe G. [more] 
Similar Threads
Hybrid Mode
