|
Shifting with easyC
OK so here's my problem. Hopefully I explain to the best I can. We want to be able to shift our Dewalt transmissions attached to the CIM motors. We have a servo attached to the shifting plate of the transmission, and when the servo rotates, it shifts gear. Our default gear is second, and we have the servo set up so it is second gear at 127. We want the trigger button to up shift, and the thumb button to downshift. Our problem is that the transmission only switches gear when the trigger or thumb button are depressed. We want it so that when a trigger or thumb button is hit, it shifts gear and you do not have to hold the button down. Is there anyway to fix this. Any help would be appreciated. My email address is greendblink182@hotmail.com
__________________
Championship Finalist - 2006 Buckeye Regional (Thanks 461 and 141!)
Fourth Year FIRST Member
Third Year Electrical Team Leader
First Year BEST and FIRST Robotics Team Co-Leader
Second Place - Robotics Competition, 2005 Bearcat BEST
Second Place - BEST Competition, 2005 Bearcat BEST
Most Photogenic - 2005 Bearcat BEST
Most Robust - 2005 Bearcat BEST
Fourth Place - Robotics Competion, 2005 Nationals(South's BEST)
"Get your philosophy from a bumber sticker."-Billie Joe Armstrong
|
Hey, I know that kid.... wait he is my son! - Mike Martus [more] 
Similar Threads
Threaded Mode