|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
CMUCam2 GUI Tilt Question
Hey, I finally got the camera working, the LabView didn't work for more than 5 minutes before it gave us errors. So I switch to the CMUCAm GUI. I got it default, turned the automatic servo movement on, then picked a color, and tracked it. The camera moved left right just fine, but when we raised the color up and down, the camera did not tilt at all. Also, when the color gets raised, the square on the tracking screen goes down. Like its inverted. When i tried changing the invert setting, the camera didn't track the color anymore. And now the tilt doesn't work.
PS. Does anyone know if we have to color calibrate the camera when its on the robot. And if we do, do we calibrate the color while at the competition? |
|
#2
|
|||
|
|||
|
Re: CMUCam2 GUI Tilt Question
Quote:
Thanks! -Joe |
|
#3
|
|||
|
|||
|
Re: CMUCam2 GUI Tilt Question
I tried the updated version and it gives me an error when I hit the run button. Ir says I think ERROR: 7. Im not sure what it was, because Im not at that computer right now
![]() And now, apparently, the camera board, was mounted on upside down.. Someone else put it together wrong. So I fixed that and now the servos turn away from the object. It sees it then moves the opposite direction. The tilt still doesn't work though. I set the setting on the CMUCam2 GUI to "Invert Tracking" and in the Color tab, when I start trackeing, the whole box turns blue and the camera doesn't move at all. Im getting confused Hopefully when I hook it up to the robot it all works. |
|
#4
|
|||
|
|||
|
Re: CMUCam2 GUI Tilt Question
Quote:
Thanks -Joe |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CMUcam2 Serial Port Diagnostics | Kevin Watson | Programming | 13 | 18-02-2006 15:05 |
| LabView CMUcam2 gui | drakesword | LabView and Data Acquisition | 6 | 28-01-2006 17:06 |
| CMUcam2 LabVIEW GUI problems | StevenB | Programming | 1 | 21-01-2006 03:08 |
| CMUcam2 GUI Program | nukem | Programming | 4 | 15-01-2006 03:19 |
| ChiefDelphi Forums Community Bulletin | Brandon Martus | CD Forum Support | 0 | 05-05-2002 22:07 |