|
|
|
 We'll defenestrate our programmer, and I'll report back our solution if we get anything working. - Nick Seidl [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| We'll defenestrate our programmer, and I'll report back our solution if we get anything working. - Nick Seidl [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Getting Dashboard data in OS X 10.4.4?
Turns out you can use the VISA Interactive Control (VISAic as we call it), I didn't realize it was there on the Mac as well as on the PC. VISAic will allow you to open a MAX-style VISA test panel for a COM port to see what you can read, and you can use this post as a guide since it's very similar using VISAic and a MAX VISA test panel (starting around step 8, only you double-click the ASRLnn::INSTR entry instead of clicking an "Open Test Panel" button). If VISAic cannot see the USB-Serial converter or cannot communicate well with it, then you can guess where your problem lies...
 VISAic can be found under Apps->National Instruments->VISA->"VISA Interactive Control". -Danny Last edited by Danny Diaz : 27-01-2006 at 14:38. 
|
|
#2
28-01-2006, 15:02
|
|||||
|
|||||
|
Re: Getting Dashboard data in OS X 10.4.4?
Went into VISA, fiddled with it, added in one driver (yay for lucky guesses), and I have a result (see attachment).
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| TTL port to a serial port on a demo board | ImmortalAres | Programming | 16 | 09-07-2005 23:44 |
| heres the code. y this not working | omega | Programming | 16 | 31-03-2004 15:18 |
| Dashboard, The Comp and sensor data... | Kevin Karan | Programming | 7 | 28-01-2004 21:31 |
| Limiting PWM in pbasic | archiver | 2001 | 4 | 24-06-2002 00:38 |
| dashboard data stream | archiver | 2000 | 10 | 23-06-2002 22:56 |
Hybrid Mode
