Go to Post Make other plans. No mass-produced food at an arena is ever going to be good. - sanddrag [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #35   Spotlight this post!  
Unread 28-01-2006, 11:21
Shadow Shadow is offline
:O
AKA: Matt
FRC #1390
Team Role: Programmer
 
Join Date: Jan 2006
Location: St. Cloud, Florida
Posts: 6
Shadow is an unknown quantity at this point
Send a message via AIM to Shadow Send a message via MSN to Shadow Send a message via Yahoo to Shadow
Re: Can't find CMUCam2 demo.llb

Quote:
Originally Posted by Kevin Watson
Can you try the software mentioned here and report back with the results?

-Kevin
I've been having the same type of error working with our camera. Everything is wired correctly, TTL port is set up, backup battery is charged, program loaded correctly (using the most updated version from your website, Kevin), etc. Everything is verbatim to what I've been reading thus far, and I'm still getting a hangup on STATE 3.

I've downloaded the diagnostic program, and run it. It doesn't show "Serial Port Diagnostics Running..." until after I restart the RC, and when I type something "To Port ->" I get no feedback.

The camera has a green light from what seems to be labeled DS1, DS2 is off, but DS3 is red.

This all seems to say to me, "your TTL port isn't working!!" but I know beyond a doubt I have hooked it up properly. So sould I assume that's a defective part or is there someone out there with more insight into the issue than I have? (I hope, I hope, I hope... )
__________________
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Example LabVIEW Apps - Dashboard, CMUcam2 and Motors Russ Beavis National Instruments LabVIEW and Data Acquisition 9 21-01-2007 17:19
CMUcam2 disclaimer Cody Carey General Forum 4 12-01-2006 01:19
CMUcam2 interfacing Kram Programming 2 27-05-2005 07:17
CMUCam2 Camera Code - Are important parts commented out? Mr. Lim Programming 4 14-01-2005 12:11
3dmax - setting a display option that I can't find DanL 3D Animation and Competition 5 05-01-2003 12:42


All times are GMT -5. The time now is 14:48.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi