Example LabVIEW Apps - Dashboard, CMUcam2 and Motors

[Danny Diaz]

Here is an update for the LabVIEW Dashboard application. It was found that on computers using a USB-to-Serial converter the Dashboard would occasionally spike its CPU utilization. To correct this the "Dashboard Read" VI has been modified, but there is no need to modify the "Dashboard Display" - hence it is recommended you replace your "Dashboard Read" VI with the one contained within the attached file.

-Danny

[Joe Hershberger]

Here is another update for the CMUCam2 GUI App. This one should be more robust with frame grabbing. It should be able to reliably restart a new frame grab if a former one fails. Give it a try and let me know if it resolves any of your issues.

Thanks,
-Joe

EDIT: Correct file posted now. Had tracking problem.

[Danny Diaz]

I have finally just decided to combine the "base" LabVIEW CMUCam2 Application and the most recent "patch" into one export, it is my hope this will make using this application a lot easier for those new to this experience.

LabVIEW CMUCam2 Application (1-21-2007) [http] [ftp]

Dig in!
-Danny