|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#10
|
|||
|
|||
|
Re: fickle autonomous
ok to give everyone a clear picture of the problem i will post the error message and the code itself, btw i tried both of your suggestions, it didn't like either of them. (note: tabs are included in the proper areas)
Skipping file. There is no tool to process the file with the given suffix. Skipping link step. Not all sources built successfully. BUILD FAILED: Tue Jan 31 13:42:48 2006 #include <stdio.h> #include "ifi_aliases.h" #include "eeprom.h" #include "ifi_default.h" #include "ifi_utilities.h" #include "serial_ports.h" #include "terminal.h" #include "tracking.h" #include "tracking_menu.h" #include "user_routines.h" #include "camera.h" #include "camera_menu.h" void User_Autonomous_Code(void) { /* Initialize all PWMs and Relays when entering Autonomous mode, or else it will be stuck with the last values mapped from the joysticks. Remember, even when Disabled it is reading inputs from the Operator Interface. */ pwm01 = pwm02 = pwm03 = pwm04 = pwm05 = pwm06 = pwm07 = pwm08 = 127; pwm09 = pwm10 = pwm11 = pwm12 = pwm13 = pwm14 = pwm15 = pwm16 = 127; relay1_fwd = relay1_rev = relay2_fwd = relay2_rev = 0; relay3_fwd = relay3_rev = relay4_fwd = relay4_rev = 0; relay5_fwd = relay5_rev = relay6_fwd = relay6_rev = 0; relay7_fwd = relay7_rev = relay8_fwd = relay8_rev = 0; { static unsigned int t; while (autonomous_mode) /* DO NOT CHANGE! */ { if (statusflag.NEW_SPI_DATA) /* 26.2ms loop area */ { Getdata(&rxdata); /* DO NOT DELETE, or you will be stuck here forever! */ /* Add your own autonomous code here. */ t++; if (t<19) { pwm01=190; /* left motor */ pwm02=190; /* right motor */ pwm03=127; /* launcher motor */ pwm04=127; /* feeder motor? */ } else if (t<38) { pwm01=150; pwm02=90; pwm03=127; pwm04=127; } else if (t<95) { pwm01=190; pwm02=190; pwm03=127; pwm04=127; } else if (t<380) { pwm01=127; pwm02=127; pwm03=190; pwm04=160; } Generate_Pwms(pwm13,pwm14,pwm15,pwm16); Putdata(&txdata); } } } |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A Warning to Human Players During Autonomous | The Lucas | General Forum | 21 | 07-04-2005 02:29 |
| Setting Autonomous Settings from OI | Tom Saxton | Programming | 15 | 27-03-2005 11:45 |
| Despite what IFI says, you can configure autonomous from OI... | TedP | Programming | 19 | 31-03-2004 10:09 |
| autonomous mode problem on field | Chris_C | Programming | 17 | 26-03-2003 19:11 |