|
|
|
 No disclaimer on earth lets you disassociate yourself with your team or what you represent because you want to say something not particularly nice, but lets you be associated again when you want to say something to encourage others, etc. - Amanda Morrison [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
05-02-2006, 15:44
|
||||
|
||||
|
Re: 3 position cylinders from bimba, legal???
NO!
<R99> There is no limit to the number of solenoid valves, air cylinders, pressure regulators, and connecting fittings you may use on your robot. They must, however, be “off the shelf” pneumatic devices rated by their manufacturers for pressure of at least 125psi. Besides the “free” pneumatic components listed on the Pneumatic Components Order form, you may purchase additional air cylinders or rotary actuators, however, they must be identical to those listed on the Pneumatic Components Order form (i.e. same part numbers), and obtained from a Bimba or Parker Hannifan distributor. If its not on the "Pneumatics Components Order form" which its not, you can't use it. Its a lame rule that stifles creativity |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rotary Position Sensors | DonRotolo | Electrical | 10 | 21-11-2005 15:03 |
| Custom pneumatic cylinders | duckshepherd | Pneumatics | 7 | 24-01-2004 20:39 |
| Bimba Pneumatics CAD site | Andy Baker | Pneumatics | 4 | 21-01-2004 11:58 |
| Ya'll think this would be legal? | archiver | 2001 | 3 | 23-06-2002 23:58 |
| Beatty and Kingman | JAlpert | Regional Competitions | 51 | 08-04-2002 16:59 |
Threaded Mode