New rule Clarification changes plans

[BoyWithCape195]

I just read rule S03

<S03> The SHOOTING MECHANISM must remain inside the ROBOT - Any mechanism used to throw balls
must be contained within the original 28” x 38” x 60”starting envelope of the ROBOT and must be
shielded such that the mechanism cannot make contact with other ROBOTs. A ROBOT that violates this
rule will be considered unsafe per <S01>.

Reversing a roller outside the starting dimensions was not considered "throwing" in the design process of our team, so we never thought twice about it. Also rule S01 states

<S01> If at any time a ROBOT’s operation or design is deemed unsafe by the head referee, it will receive a 10-
point penalty and be disabled for the remainder of the match. If the safety violation is due to the ROBOT
design, the head referee has the option to not allow the ROBOT back onto the field unless the design has
been corrected. An example of unsafe operation is repeatedly throwing balls off the field at audience
members, media personnel, judges, referees, etc. An example of an unsafe design is a SHOOTING
MECHANISM that has a large mass that is stopped abruptly at the end of travel and is at risk of breaking
off the ROBOT and becoming a projectile.

Would this mean if it wasn't considered "dangerous" by the head referee, you could you use it? It also says due to robot design, the head ref would have to consider it "unsafe"