|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Short circuiting the camera
Is it possible to short circuit the camera? we lost function on our camera after we plugged the port that is supposed to receive info with a pwm that gave it power, the other possibility we think is that we grounded the transmitter by putting the cable in upside down?
any help with this problem? we had the camera working perfectly before it got plugged in the wrong way |
|
#2
|
||||
|
||||
|
Re: Short circuiting the camera
Does it still turn on?
If soooo... Try plugging the servos back into the camera and using the Camera GUI to send commands to the camera. |
|
#3
|
|||
|
|||
|
Re: Short circuiting the camera
Quote:
|
|
#4
|
|||
|
|||
|
Re: Short circuiting the camera
there is also an on/off switch at the top of the camera, can't tell you how many times that's been our problem.
|
|
#5
|
|||
|
|||
|
Re: Short circuiting the camera
Quote:
|
|
#6
|
||||
|
||||
|
Re: Short circuiting the camera
Last years camera got fried. There was definately smoke and it left an awful taste in the air. If it smells burnt, it just may be.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CMU Camera kills robot controller if not found. | Chris_Elston | Programming | 21 | 27-03-2006 14:30 |
| How To Use the Google Camera | generalbrando | Kit & Additional Hardware | 2 | 07-02-2006 16:00 |
| Camera Short Circuit? | MustangRobotics | Technical Discussion | 3 | 18-01-2006 14:42 |
| Scripting Setup and the Camera + Serial Port Drivers | CJO | Programming | 22 | 11-01-2006 17:42 |