Wheels Needed

Cory · #1 08-02-2006, 02:43

Quote:

Originally Posted by Arkorobotics

Does anyone know any wheels that can fit to a 5/16 shaft, metal hub, and rubber on the outer ends?

The wheelchair wheels that Skyway gave us years ago have 5/16" ID bearings. If you don't have any, ask another team that's been around for awhile if they can give you some.

sanddrag · #2 08-02-2006, 03:17

Over the years I've come to the realization that there are not all that many wheels with keyway (or ready for keyway) bores out there on the market. If it's something specific that you want, you'll have to make it yourself. Sometimes you'll get lucky and find something that fits what you are doing, but it is fairly common to have to manufacture a solution (at least hubs) yourself.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting A Bot To Turn	Andrew Blair	Technical Discussion	20	16-10-2005 23:49
Four Wheel, all steering, non-omniwheel, ONE power/motor source drive	FizMan	Technical Discussion	31	27-04-2004 12:12
Lots of Wheels and F = u x N	archiver	2001	17	23-06-2002 23:37
Power Wheels parts needed: Will trade, sell soul, etc.	archiver	1999	13	23-06-2002 22:27
"Motors and Drive train edition" of Fresh From the Forum	Ken Leung	CD Forum Support	6	29-01-2002 12:32