FisherPrice Problems

[Bruce C.]

Originally Posted by Al Skierkiewicz

I thought is was the other way around. (I have gotten this goofed up before though.) What may be confusing is that the input PWM is 120 Hz as is the internal loop reading the input.
The difference between the probes is pretty good. Still if you want to have accurate current data you must use another method. i.e. if you want to correlate current and breaker heating.

After a diligent search of the archives, I did find this...
http://web.archive.org/web/200410222...3datasheet.pdf
It lists the 883 at 2kHz. However this sheet compares the 883 and 884 as having different deadband characteristics and the 884 being programmable as to the deadband.
http://web.archive.org/web/200208052...Victor_884.htm

OK, I'm confused. We found this:

http://www.ifirobotics.com/forum/vie...61922d031d945b

But I'm still not sure what that means. Is it talking about a code loop rate, victor input sample rate, or victor output pulse rep rate? I think somebody's gonna have to hook up a 'scope.