stickers size

alon123 · #1 16-02-2006, 03:48

is there any rule about the stickers size?
tnx!

Andy Brockway · #2 16-02-2006, 07:55

If you are asking about stickers used for decoration, there is no limit. The rules that apply are visibility of the balls, the RC LEDs, the beacon and the radio LEDs. Otherwise you can cover the entire robot as long as you make weight.

Elgin Clock · #3 16-02-2006, 07:57

Are you talking about the display of a team number on your robot?
There is a required size for that, but I'm not sure where in Section 5 (The Robot) it is exactly.

Andy Brockway · #4 16-02-2006, 08:03

Quote:

Originally Posted by Elgin Clock

Are you talking about the display of a team number on your robot?
There is a required size for that, but I'm not sure where in Section 5 (The Robot) it is exactly.

<R12> 4" high with 3/4" stroke width

EricH · #5 16-02-2006, 17:12

Quote:

Originally Posted by Andy Brockway

<R12> 4" high with 3/4" stroke width

And on a contrasting background. If you have the best robot in the world, but nobody can read your number from the stands, and you are with bad partners and lose every time, you won't be picked because nobody knows who that really good robot is.

Wetzel · #6 16-02-2006, 18:49

Quote:

Originally Posted by alon123

is there any rule about the stickers size?
tnx!

If they get stuck on the Epcot ball they are too big.

Wetzel

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Size Of control box	rcubes85	Control System	8	18-02-2005 10:22
Robot Controller File Size Limit ??	RoboGeek	Programming	1	17-01-2005 19:59
What size monitor do you use?	Elgin Clock	IT / Communications	30	10-03-2004 16:53
My file size is too big.....	JamesWu	3D Animation and Competition	20	20-02-2004 22:31
Is there a size regulation for the pit area if we wanted to put up a banner	Ragin_Kage	General Forum	6	14-03-2002 15:33