|
|
|
 I think being successful in FIRST is creating an environment where people can grow, learn, change, and recreate... It's about making an environment where kids feel they can be successful... in whatever discipline they choose. - ColleenShaver [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Code Error after reset
When we download the code, it runs perfectly. After pushing the reset switch, it gets a code error. Of course we can't debug it, cause we just reset it.
What we've done is add Kevin's Camera and Serial Code and tracking code with changes added to the tracking code. We've also taken out the original serial code (as per instructions) and initialized the new serial code. I'm suspecting the serial code (which is interrupt driven) is not being initialized properly and is causing our headaches. Has anyone else come across this? Is there a way to debug this? |
|
#2
20-02-2006, 12:34
|
|||
|
|||
|
Re: Code Error after reset
Have you tried commenting out the existing interrupts?
I found that when I added the serial code interrupts I needed to remove the default ones for it to work. |
|
#3
20-02-2006, 12:35
|
|||
|
|||
|
Re: Code Error after reset
Quote:
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Code malfunction after robot reset? | jgannon | Programming | 6 | 01-03-2006 14:42 |
| Problem with idata_user_routines.o? | Adrien | Programming | 3 | 12-02-2006 01:33 |
| Code runs only once, fails on reset | roknjohn | Programming | 7 | 21-02-2005 20:24 |
| Team THRUST - Kevin's Code and Camera Code Combine | Chris_Elston | Programming | 3 | 31-01-2005 22:28 |
| heres the code. y this not working | omega | Programming | 16 | 31-03-2004 15:18 |
Linear Mode
