Project does not build

[team 803]

My project won't build, no error pops up, it just freezes up for a sec, then does nothing.

[Mike AA]

Originally Posted by team 803

My project won't build, no error pops up, it just freezes up for a sec, then does nothing.

Have you scrolled down the project window (if you are using mplab) and found the error window? Should be a small white box with lots of wording in it as you hit build stuff will scroll down. Usually by default this is found at the very bottom of the project workspace, I alway spull it up into the top part to make more visable.

-Mike

[team 803]

Wow, I feel... Very unobservant...
There is an error:
Error [1027] unable to locate 'user_Serialdrv.h'

[team 803]

I searched through my computer, and cannot find that file.

[team 803]

Well I fixed that problem now another one came up.

MPLINK 3.90, Linker
Copyright (c) 2004 Microchip Technology Inc.
Error - could not find definition of symbol 'Serial_Driver_Initialize' in file 'C:\mcc18\New Folder\user_routines.o'.
Errors : 1

[comwiz7]

When I run into problems like these, I usually re download the default code and make all my changes AGAIN, which sucks. If that doesn't work, completely uninstall the compiler and all its components and then reinstall them (this worked for me countless times). If all this fails, then just start over on a fresh new computer.