pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube

Bob Steele · #1 25-02-2006, 14:37

Astronouth7303 · #2 25-02-2006, 14:47

I'm pretty sure Hell freezes over on a regular basis. I wonder what it is now...

Shucks, only 33 degrees.

(And yes, I am talking about a real place.

)

Koko Ed · #3 25-02-2006, 15:15

You guys better call the cops.
Looks like someone stole your wheels.

Alex Cormier · #4 25-02-2006, 15:19

possibly omni wheels?

Koko Ed · #5 25-02-2006, 15:20

Quote:

Originally Posted by Alex Cormier

possibly omni wheels?

Invisible Omni-wheel....
You and your omni wheel fetish.

KenWittlief · #6 25-02-2006, 15:44

would look awesome with lights inside!

Devil2005 · #7 25-02-2006, 16:27

Now, i know that ship was tuesday and it took you guys till saturday to put up a pic? Its about time, but I'm still a little curious bout it. Can u tell me anything more? I'd say everything is rather hidden behind you ice cube on wheels, or better yet, blocks.

Erics626 · #8 25-02-2006, 17:39

The wheels are on there all right

. The blocks are there to hold up the bumpers, which we won't put on 'til after weigh-in. I don't think I supposed to say anything more about the robot, so I'll wait and see if we have permission to release any information on it.

Bob Steele · #9 25-02-2006, 17:44

Eric...go ahead tell them all about it...
Hey, is this Devil2005 an ex-Devil? with the initials Ryan Mills?

Quote:

Originally Posted by Erics626

The wheels are on there all right

. The blocks are there to hold up the bumpers, which we won't put on 'til after weigh-in. I don't think I supposed to say anything more about the robot, so I'll wait and see if we have permission to release any information on it.

Alex Cormier · #10 25-02-2006, 17:47

Quote:

Originally Posted by Bob Steele

Eric...go ahead tell them all about it...
Hey, is this Devil2005 an ex-Devil? with the initials Ryan Mills?

so, what's your drivetrain?

Bob Steele · #11 25-02-2006, 17:51

Oh crap... I knew there was something we had forgotten...!!
We will just have to have our alliance partners scoot us around on the wooden blocks...

Quote:

Originally Posted by Alex Cormier

so, what's your drivetrain?

Erics626 · #12 25-02-2006, 17:51

All right, let's see if I can get this all right....somebody correct me if I'm wrong. Drive-train consists of two CIM motors with Dewalt transmissions chained to run three wheels per side. The robot has six wheels and sits on four in normal competition. In the rear there are omni-wheels and in the front there are 10" pneumantic wheels(?). In the center we have smaller wheels that are used in assistance in getting up the ramp. Our goal is to be an effective one-point herder and a decent three-point shooter. The bottom of the robot has an opening for a spinning cylinder driven by a CIM motor. The ramp up into the robot has fingers that open and close to allow for the CIM motor to get up to speed before we shoot the balls back out. The bottom portion of the robot is mostly empty space for ball holding. Our three-point shooter is human-loaded only. The shooter is also driven by a CIM motor, and has a servo controlled gate that opens up after the motor has gotten up to speed. We shoot one at a time, but I am unsure of the distances. That's all I can think of right now.

Alex Cormier · #13 25-02-2006, 17:55

Quote:

Originally Posted by Erics626

All right, let's see if I can get this all right....somebody correct me if I'm wrong. Drive-train consists of two CIM motors with Dewalt transmissions chained to run three wheels per side. The robot has six wheels and sits on four in normal competition. In the rear there are omni-wheels and in the front there are 10" pneumantic wheels(?). In the center we have smaller wheels that are used in assistance in getting up the ramp. Our goal is to be an effective one-point herder and a decent three-point shooter. The bottom of the robot has an opening for a spinning cylinder driven by a CIM motor. The ramp up into the robot has fingers that open and close to allow for the CIM motor to get up to speed before we shoot the balls back out. The bottom portion of the robot is mostly empty space for ball holding. Our three-point shooter is human-loaded only. The shooter is also driven by a CIM motor, and has a servo controlled gate that opens up after the motor has gotten up to speed. We shoot one at a time, but I am unsure of the distances. That's all I can think of right now.

ahha! i knew i would see omni wheels on that beast!

Courtneyb1023 · #14 25-02-2006, 18:37

Is the hopper material corrugated plastic? That's what we used. Its pretty strong and really light weight.

Koko Ed · #15 25-02-2006, 18:44

Quote:

Originally Posted by Alex Cormier

ahha! i knew i would see omni wheels on that beast!

Oy!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Death of FIRST	Anton Abaya	General Forum	23	03-05-2006 17:18
Real names, please	Andy Baker	General Forum	131	21-07-2004 22:07
pic: Prototype robot -1018 - RoboDevils	CD47-Bot	Robot Showcase	15	22-02-2004 17:27
The 2003 Index of team's post about their robot...	Ken Leung	Robot Showcase	4	28-02-2003 00:18
More 'Best' Robots (a well thought list)	archiver	2000	2	23-06-2002 23:11