final weight

[Joe J.]

Our original weight was 124 lbs. we did some drilling and cutting and weighed it on two different scales we tested each scale with dumb bell weights and they were equal we weigh our robot and we get 113 lbs. and 120 lbs. go figure . We ended up taking some more stuff off but never weighed it again. So we're probably just under 120.

So our field weight would be: 144.5 (Robot + Bumpers + Battery)

[Mullen]

approx. 68 . he have alot of steel to add on thursday at detroit

[Stuart]

81.5(and all we got left is bumpers and some lexan for our spinner protectors

[AJL930]

I believe initialy we were half a pound over weight. But after eliminating an unecessary piece and cutting the height of the robot down by several inches (All thanks to a power saw) our final weight came down to about 117-118 lbs. A lot of that came form Speed holes and using polycarbonate instead of a steel/Rubber wraped grate for side panels.