final weight

[henryBsick]

119.7 lb at ship after being 10 pounds over a week before ship with no power to the machine shop for the final week.

[Steve Howland]

121-122: a bit of weight loss still needed, but better than the fifteen we had to lose in week 6. The Jenny Craig Diet did wonders for it. (we really did have a box labeled this which we filled with any material removed from the robot until the box totaled 15 lbs.)

[KTorak]

119.5 or there abouts...underweight regardless

[Donut]

114 lbs. the day of ship. All we have to add is some side protection (we'll probably do this with strips of lexan or netting).

Including our 11 lbs. of bumpers and the battery, we weigh 137 lbs. right now.

[Zoheb N]

The day before ship 118... yeah baby

[Nate Edwards]

For the first time ever we were severely overweight, at about 124 without a ball pickup, the ball pickup weighed about 4-5 pounds and our final weight turned out to be 119.5, we started cutting everything in sight (including smaller netting, cutting excess from top and bottom, cutting plates, cutting holes, making wire smaller and even accidently cracking the entire motor control board, while making a whole for a connector we didn't have.)

Bottom line:
We hope the scale at competition is the same as ours.

[Arkorobotics]

117.5 without bumpers or battery

[team1611]

the night before ship... 157. ship day... 124. we have a little more work to do but it shouldnt be too hard to take off 4 more pounds after already taking off 33 lbs.

[Logan Byers]

Team 461's Rowdy 7 was somewhere in the 118-119 lb. range.

[Tim566]

Originally Posted by team1611

the night before ship... 157. ship day... 124. we have a little more work to do but it shouldnt be too hard to take off 4 more pounds after already taking off 33 lbs.

wow thats alot...you know theres only so many holes you can drill befrore you compromise structural integrity so you guys should be carefull not to make the same mistake one of the members on my team did taking from a crucial part setting us back. Well good luck to you and all the other teams competing out there.

[s_forbes]

118.3

That's after we took out 25 lbs worth of holes.

[team1611]

Originally Posted by Tim566

wow thats alot...you know theres only so many holes you can drill befrore you compromise structural integrity so you guys should be carefull not to make the same mistake one of the members on my team did taking from a crucial part setting us back. Well good luck to you and all the other teams competing out there.

After cutting as many holes as we could without losing strength, we only lost about 7 pounds. Thats when we decided to take off the lexan around our hopper. The day we shipped our robot, we replaced the lexan with some ... chicken wire (yeah, we're from the south). Actually the chicken wire ended up working better.

[lallamavolador]

ours weighed 119.75

[orelinde]

10 pounds over the limit there abouts. but we have already worked out a plan for getting under the limit. slimfast

[Tim566]

hmm...I dunno if slimfast is well...fast enough you may need to use liposuction instead...just a thought... hey i wonder what if when they weighed it we put attached lots of helium balloons? it could work right?