|
|
|
 You don't have to build a robot to be on a robot team. This isn't about the robot, it's about learning. - engunneer [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| You don't have to build a robot to be on a robot team. This isn't about the robot, it's about learning. - engunneer [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
CMUcam w/ PICBasic
Has anybody done any CMUcam projects using PICBasic or PICBasic Pro?
I'm having the toughest time getting my PIC talking to it. I've got a Basic Stamp 2 that I have got communicating with the CMUcam using the example available on Parallax's website http://www.parallax.com/dl/src/prod/...amprogram2.bs2 Going from that I easily converted it into a PICBasic program by simply changing the "CR"s to 13's and a few other minor changes. If anybody's done any projects I'd really be interested in seeing a working example. Thanks Bill |
|
#2
07-03-2006, 15:07
|
|||
|
|||
|
Re: CMUcam w/ PICBasic
OK
I got it talking. As it turns out I was trying to power too many devices with my power supply and the voltage was getting pulled down to around 4V instead of 5V. I still would be interested in seeing some examples if anybody's got any? |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Big Problem w/new CMUcam! | Darkelement | Programming | 4 | 30-01-2006 14:03 |
| CmuCam Questions? | Mr.D | LabView and Data Acquisition | 1 | 26-01-2006 11:32 |
| Major CMUcam issues - LabView app won't work, very low-quality picture | scottmso | Programming | 5 | 19-01-2006 17:51 |
| CMUcam for Dummies? | nosaj4268 | Programming | 2 | 14-01-2006 23:55 |
| CMUcam setup | Ryan Collings | Programming | 26 | 13-01-2006 01:00 |
Linear Mode
