|
Re: pic: Wood as an
There's something to be said about "craftmanship" here.
No CNCs were used; just an arc carefully drawn with fine pencil, a radius jig for the router, and the steady hand of a master of his trade (20+ yrs).
Templates for the ball guides were cut with a router. Each template was touched up by hand then used to cut the rest of the lot for the build. Final hand finishing followed by assembly (clamps, wood screws and glue) completes the ball guide. They're strong, lightweight(ed), true, and almost a work of art.
The wheel was cut with a radius jig and router. Again, a template was made. The final wheels were trued to about +/-0.005" on the radius.The wooden pair saves almost 6 lb. compared to the 16" Skyway wheels we started with!
__________________
"There's never enough time to do it right, but always time to do it over."
2003 AZ: Semifinals, Motorola Quality; SoCal: Q-finals, Xerox Creativity; IRI: Q-finals
2004 AZ: Semifinals, GM Industrial Design; SoCal: Winners, Leadership in Controls; Championship: Galileo #2 seed, Q-finals; IRI: Champions
2005 AZ: #1 Seed, Xerox Creativity; SoCal: Finalist, RadioShack Controls; SVR: Winners, Delphi "Driving Tomorrow's Technologies"; Championship: Archimedes Semifinals; IRI: Finalist
2007 LA: Finalist; San Diego: Q-finals; CalGames: Finalist || 2008 San Diego: Q-finals; LA: Winners; CalGames: Finalist || 2009 LA: Semifinals; Las Vegas: Q-finals; IRI: #1 Seed, Finalist
2010 AZ: Motorola Quality; LA: Finalist || 2011 SD: Q-finals; LA: Q-finals || 2013 LA: Xerox Creativity, WFFA, Dean's List Finalist || 2014 IE: Q-finals, LA: Finalist, Dean's List Finalist
2016 Ventura: Q-finals, WFFA, Engineering Inspiration
|
Skill in software engineering is all about algorithmic understanding and intuition. Implemenation is an important, but ultimately secondary, concern. Programming languages are more or less arbitrary.
- phrontist [more] 
08-04-2006, 00:25
Similar Threads
Linear Mode
