[YMTC]: Inspect Redabot's Pneumatics

[dlavery]

To provide even more information:

Redabot's set-up is illegal. It is a violation of Rule <R97>.

<R97> The Nason pressure swtich must be connected to the output end of one of the Clippard tanks to sense the tank's pressure. The two wires from the pressure switch must be conneted directly to a digital input and ground terminal on the Robot Controller, and the controller must be programmed to sense the state of the switch and operate the spike relay that powers the compressor. The Parker Pressure Vent valve must be connected to a Clippard tank such that, when manually operated, it will vent to the atmosphere to relieve any stored pressure. The valve must be placed on the robot so that it is visible and accessible.

Since the RC is not controlling the compressor, utilizing the input from the pressure switch, Redabot is in violation. It is also a violation of this question from the Q&A system. QED.

-dave

[Steve W]

There is also no mention of the 60 psi guage downline of the regulator to show the proper working pressure of 60psi.

[Richard Wallace]

Originally Posted by Steve W

There is also no mention of the 60 psi guage downline of the regulator to show the proper working pressure of 60psi.

Good catch, Steve.

I was thinking that the Norgren primary regulator (K47) is often close-coupled to the Norgren 0-160 psi gauge (K410), but that is not always true. So I should have mentioned the gauge along with the regulator. Both the storage pressure (<120 psi) and the working pressure (<60 psi) must be indicated by gauges on the robot.

[ttedrow]

I did not find anything new. But how did team reabot make it the the championship with this setup. It would not have passed at my regional.

[dlavery]

Originally Posted by ttedrow

I did not find anything new. But how did team reabot make it the the championship with this setup. It would not have passed at my regional.

Was your inspection based on the 2006 rules or the 2007 version?

Check the date of the original question.

-dave