Go to Post There is nothing that says 'gracious professionalism' like making brunch for your opponents. - Monochron [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 05-05-2006, 06:52
jpflorido jpflorido is offline
Registered User
no team
 
Join Date: May 2006
Location: Spain
Posts: 3
jpflorido is an unknown quantity at this point
Servos don't work

Hi folks!!

I'm new in this CMUcam2 world :-). I bought the camera some months ago and it works OK. Recently, I decided to buy a couple of servos for motion purposes. The model are HS-422. I've tried to use them, but they don't work...

First of all, I tried to connect them via board power, with the servo internal power jumper in place... but they don't work... the power was around 12V and the intensity about 300mA.

Then, I decided to buy another power adaptor to run the servos off of external power. I leaved the jumper opened and the servos were connected to an external power... I tried from 6V to 12V... but, still, they didn't work. Well...with 12V, the servos moved, by themselves, to the initial positions when they were connected for the first time, but then I tried to move them to another positions and they didn't move....

What Am i doing wrong???

Can anybody help me, please??

Thanks in advance,
Javier.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What Artist Influence You? Koko Ed Chit-Chat 12 01-12-2006 11:33
Springs and Work sanddrag Math and Science 11 17-05-2005 18:35
Seeing First Work D@ve General Forum 2 15-04-2005 19:03
What Hours do you work? Ryan Albright Chit-Chat 2 14-03-2005 15:46
How do the servos work? tml240 Motors 25 18-02-2004 07:47


All times are GMT -5. The time now is 15:15.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi