Looking for Mecanum Wheels

[ChuckDickerson]

Originally Posted by Greg Needel

I think you should bore them to 1.124 and also make pressfit bushings available to easily convert them the .874 if needed.

Another option might be to make them 1.124 for the 1/2" ID flanged bearings and if someone wanted to use a 3/8" shaft just put a 3/8" ID / 1/2" OD flanged bronze bushing in the 1/2" ID roller bearing to take up the space. They are cheap (~$.50-$.75) and readily available from places like McMaster and MSC.