Robot Carts

[Josh Goodman]

Our team is in the process of making a new robot cart. Could some people post some things they have on their cart or post a picture of their cart? Thanks!

[fimmel]

team 885 is redoing their cart also. im currently designing a lift for the fron to it can turn into table from a height thatg can have the robot fit throught doors. ill post pics of my design when its done.

[EHaskins]

Team 1103 made a new cart this year. It had a rotating platform that is great for demonstrations, but could be locked for moving arond the pits. It also had a car stereo in it . I will post some pics if I can find them.

Edit: the cart also has a tray that folds out from the back side.
I attached a photo, but I couldn't find one from the front.

[Dan Petrovic]

If you're looking for carts to model off of, Buzz (175) has a beautiful cart.

[Josh Murphy]

We plan on making one also. We want to make it motorized and all we do is steer it(nice for atlanta).

[Dancin103]

Our team has a pretty simple cart, but it gets the job done. We made our cart from 80-20 and diamond plate. We have two tool boxes underneath of it for our tools. Have the tool boxes makes it easy to make quick fixes.

[dbell]

buzz 175 has a nice cart. It can hold stuff in addition to the bot. However It is heavy. Our cart is not heavy, but it can only hold batteries and the bot. But it can easily fit into a van. It's like a wagon, has a handle that you pull and steer with. Simple but it works. We got it at Lowe's and made some small modifications.

[Billfred]

The rookie year, 1293 used a little red wagon. No room for anything much, but since the robot was so ridiculously overbuilt for what it was, it didn't really matter.

In 2005 and 2006, 1293 used a yellow garden cart with the sides knocked off. Holds a robot about perfect, although there's still not much room for extra toolboxes or batteries. Some under- or over-cart storage might be in order for it.

[Gdeaver]

Our cart is made out of Bosh extrusions. It has held up well and allows for adjustment and modifications.

[BuddyB309]

we have our cart station the robot up high so we dont have to bend over to work on the robot.

[Pavan Dave]

Our cart has Colored lights on it and it has different horns and sirens that we used in atlanta so people know a 120lb robot is bout to come through.

-Pavan.

[Cory]

Here's a picture of our cart-http://www.chiefdelphi.com/media/photos/15172

The underglow is currently not working. It's a pretty nice setup though. The push handles can hold the robot in the air (when properly setup) to allow work on the underside of the bot, or at eye level so you don't have to bend over.

It's got a stereo inside the pull out drawers, which gets extensive use during late nights in our shop

The drawers are also great for bringing pretty much everything we need out onto the field with us.

[Dick Linn]

Here is a wagon with 4-wheel steering that would make a great robot cart platform!

http://www.shopfloortalk.com/forums/...ead.php?t=9441

[AcesPease]

We used to have a big cart. It was difficult to move around in tight spaces and very expensive to ship to Atlanta. We now have an "I" shaped cart made out of 2"x6" aluminum extrusions with 30" handles on each end that can be reversed to make the cart a table in the pits or folded to slip the cart into the back seat of a car. It has four heavy castors and handles easily in tight spaces. The robot sits only about 6" off the floor so it is very stable. The cart is only 28" wide so it easily fits through doors to demonstrations. It is has room for four batteries or two batteries and some tools on the ends.

Link to our cart

[Shawnx715]

hey Dancin103, do you have any pictures of your cart? if you dont mind, could up load them up?