CMU 2 cam with Vex

[EHaskins]

www.kevin.org/frc

If you want any other help PM or e-mail me Haskinseric@hotmail.com.

EDIT: I tested my vex with the code in frc_camera_s.zip. It may work with version 2 and/or the full version of the code, but I know the first simple version works.

You will need to follow the instructions in the readme to move the code to an EDU/Vex robot. I know it says its for the EDU only, but the process to move it to a VEX is the same.

Also I was using the Radio Shack programming kit, but using MPLab IDE and IFI Loader. This will work with MPLab, but I don't think its possible with EasyC, because you wont have access to the serial ports.

Sorry for the long edit, but I thought of alot after I typed the my response.

Again, if you want any other help PM or e-mail me Haskinseric@hotmail.com.

EDIT Again: If you need a copy of the MPLab default code for a vex you can download it from http://www.vexlabs.com/vex-robotics-downloads.shtml. Here is a direct link to the file http://www.vexlabs.com/docs/vex-startup-code.zip. You can also get IFI loader from that page.

Hope this helps,