|
Re: pic: Completed Mecanum Module
Quote:
|
Originally Posted by sanddrag
To hold the CIM pinions and keys on, Loctite 680 retianing compound works nicely. It takes a fair amount of heat to remove, but otherwise is very simple and effective.
|
I'll look to see if we have some of that lying around somewhere as well. Thanks for the suggestion.
We'd been planning on using the same system of retaining the pinions as on the kit transmissions. The team is a bit averse to using Loctite on anything because of the large amount of plastic we typically have on the machine. Instead, we use lock nuts.
__________________
--Madison--
...down at the Ozdust!
Like a grand and miraculous spaceship, our planet has sailed through the universe of time. And for a brief moment, we have been among its many passengers.
|