Dimensions of robot box

[Cory]

Originally Posted by dhitchco

What year did FedEx change the maximum dimensions of the robot shipping box?

It was changed for the 2002 season, I believe. It got smaller by like 4" or something.

[Andrew Schuetze]

Okay, if one where to have rebuilt their crate of many years because something crushed it in transit and destroyed half of your robot on it's way to Atlanta and didn't tell you and you already built a new one that splits down the middle so that you can use it to organize your pit area with shelving, how to you tie down the robot while the crate is in two pieces???

http://www.chiefdelphi.com/media/photos/24789

Do you only tie down on one side
Or do you have a panel that comes off such that you can put the robot in and close the clamb shell design, tie down the robot on both sides and then screw on the panel...

please excuse the run-on sentences

[DonRotolo]

Originally Posted by Andrew Schuetze

how to you tie down the robot while the crate is in two pieces???

There are many ways: One side only, make a full width 'second' floor to tie it down, use compressible materials to hold it steady, build in arms that hold it when the clamshell is closed... My best advice is to find a commercial package that works that way and see how they did it.

Or my favorite: Tie it down after it's closed. The freshman inside goes for the ride...

Don

[Andrew Schuetze]

Originally Posted by Don Rotolo

Or my favorite: Tie it down after it's closed. The freshman inside goes for the ride...

Don

Some good advice yet it begs the next question, How much Food and Water does one pack in the crate per week until the first regional event This would certianly make the case for attending one of the early regionals

On the serious side, I had not thought of adding in a second floor which is the full 4 x 4 size to tie down to and will likely go with that idea. I always had fun working within the tight confines of the crate already getting tie down straps tight. This way the whole thing can be locked tight outside of the crate and then placed in the crate half, secured and then the clambshell closed.