Programing code

[chris31]

Read the readme that Kevin included with his code. It should tell you how to use his code in yours. If I recall all you have to do is make sure you have tracking.c, tracking.h, camera.c, and camera.h. Then make sure you #include the header files in your user_routine and then make sure you call all the camera initilization and tracking methods.

[teh_pwnerer795]

Originally Posted by chris31

Read the readme that Kevin included with his code. It should tell you how to use his code in yours. If I recall all you have to do is make sure you have tracking.c, tracking.h, camera.c, and camera.h. Then make sure you #include the header files in your user_routine and then make sure you call all the camera initilization and tracking methods.

ok im somewhat majorly confused..... should i include all of the files found in the zipped file?? or should i only include tracking.c/.h and camera.c/.h? ... really confused im reading the 'read_me' and its telling me to delete this and add this..

[teh_pwnerer795]

I have found my problems

www.InnovationFirst.com
10/10/2005
- Added a checksum to the breaker panel packet
- now using <stdio.h>, compiler needs -nw=2066 to suppress warnings (under project->build options->project->MPLAB C18->Use Alternate Settings)
- Note: when using a 'printf' use a '\r' rather than a '\n' with the C18 compiler (v2.4 or later)

This is what has being failing on me

[teh_pwnerer795]

GUYS .. ima cry.. i do not have the 2.4v of C18... i have 2.2v but not 2.4:'( so this is probally the reason why i am getting the error....

[chris31]

Originally Posted by teh_pwnerer795

GUYS .. ima cry.. i do not have the 2.4v of C18... i have 2.2v but not 2.4:'( so this is probally the reason why i am getting the error....

If I recall, v2.2 will not work. Only v2.4 will work.