Blinking Red Light

[chris31]

When you run IFI Loader and do a Controller Verify it should tell you what controller it is.

[teh_pwnerer795]

Originally Posted by chris31

When you run IFI Loader and do a Controller Verify it should tell you what controller it is.

Ye i do that but it doesnt say wat it is..... it just says version and FRC


also i keep getting this error'


MPLINK 3.90, Linker
Copyright (c) 2004 Microchip Technology Inc.
Error - processor types do not agree across all input files.
Errors : 1

BUILD FAILED: Thu Dec 21 17:14:28 2006

[Cuog]

Did you follow all the instructions on using last years RC as I'm pretty sure that you have an 05?

[teh_pwnerer795]

Originally Posted by Cuog

Did you follow all the instructions on using last years RC as I'm pretty sure that you have an 05?

Mostly likely that i do. do u have the txt file that explains how to change the linker files or w.e? plz and thxs

[Cuog]

Originally Posted by previously mentioned txt file

To compile this project to work with your 2005 FRC (18F8520) system do the following:

1. Select the correct device from the MPLAB IDE.

Configure->Select Device->PIC18F8520

2. Replace the library file with the appropriate one.

Remove the FRC_Library.lib file and replace it with FRC_Library_8520.lib

or

Remove the FRC_alltimers.lib file and replace it with FRC_alltimers_8520.lib

3. Remove the 18f8722.lkr file and replace it with the 18f8520.lkr file

4. Rebuild your project and download the HEX file to your controller.

There you go

[teh_pwnerer795]

Originally Posted by Cuog

There you go

awesome thxs alot