|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
File System for the RC
It's a little early to mention this, since the code isn't finished, but I can't wait.
Take a look at this cool product that will make it very easy to let the robot control code talk to an SD memory module: http://www.chipdos.com/ I have always been annoyed that you have to recompile the control program to implement changes to an autonomous program or script. Using this device, you can use short text strings to specify the steps of an autonomous script, and simply edit the file on the SD module connected to your PC, plug the SD back into the RC, and off you go. I am going to use the SPI interface to talk to this thing, since in the RC environment a synchronous protocol is easier to deal with than async. In this case it can be done with bit-banging on 5 digital I/O pins. Another thing, it runs on 3.3 VDC, so make sure and have a regulator on hand. Even though the power supply is 3.3 volts, it can interface with 5 volt control signals. I will post more as I figure it out. Jim |
|
#3
|
|||
|
|||
|
Re: File System for the RC
I first found this device on www.sparkfun.com, but ended up buying a slightly different one from ChipDos...
I like the connector on the Spark Fun version better... Jim Quote:
|
|
#4
|
||||
|
||||
|
Re: File System for the RC
So after I saw you r post I decided to try to make my module work, and I found some info you might find useful.
http://www.sparkfun.com/cgi-bin/phpb...ight=dosonchip http://www.sparkfun.com/cgi-bin/phpb...ight=dosonchip |
|
#5
|
||||
|
||||
|
Re: File System for the RC
Have you been able to make a DOSonCHIP module to work at all?
|
|
#6
|
|||
|
|||
|
Re: File System for the RC
BTW, thanks for the very informative links...
I haven't even powered mine up yet, as I am waiting for the 3.3 volt regulator I ordered... Originally, I tried to order the development board from ChipDos, but they quoted January delivery, so I changed the order to the plain module. That is why I bought from them instead of Spark Fun. I would like to get it running from a terminal first because it should be easier to deal with, then I will move on to SPI. Jim |
|
#7
|
|||
|
|||
|
Re: File System for the RC
I found information on another similar product from one of the links you sent:
http://www.saelig.com/miva/merchant....go ry_Code=FF I will continue with the ChipDos one, since I already have it, and it looks simpler to use. There are many complaints about it, but some people have been able to make it work. I think this will be a handy device to have on the robot... Jim |
|
#8
|
|||
|
|||
|
Re: File System for the RC
Sorry for the delays, I finally got around to making this module work. It has some annoying qualities, but I think we will be able to use it for the upcoming 2007 season.
I will be posting about this project on a blog that I finally set up here: http://www.techranch.com/blog/ Thanks, Jim Last edited by JimGRobot : 02-01-2007 at 01:51. |
|
#9
|
|||||
|
|||||
|
Re: File System for the RC
Quote:
|
|
#10
|
||||
|
||||
|
Re: File System for the RC
Did you get the SPI working or are you just using an rs232-TTL converter?
|
|
#11
|
|||
|
|||
|
Re: File System for the RC
To talk to CF cards with FAT filesystems, you might be able to use code and designs from Minty MP3 (http://www.ladyada.net/make/minty/). There is code for a PIC18 under the firmware section (fat16.c and cf.c).
|
|
#12
|
||||
|
||||
|
Re: File System for the RC
Quote:
|
|
#13
|
|||
|
|||
|
Re: File System for the RC
So I see that you get by with 640K of RAM.
|
|
#14
|
|||
|
|||
|
Re: File System for the RC
Quote:
I will assume it works on the same protocol as SD, which is SPI. The SPI portions of the IFI controller's PICs are being used for internal function. If so, that software wont be a direct fit for what you want it to do. |
|
#15
|
|||
|
|||
|
Re: File System for the RC
If the page isn't loading correctly, another copy of the same info is here: http://web.media.mit.edu/~ladyada/make/minty/index.html
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PHP file system stuff | Ryan M. | Website Design/Showcase | 3 | 06-12-2004 07:36 |
| Standardized Scouting System/File Format | phrontist | General Forum | 15 | 18-04-2004 17:05 |
| Dxf File for the First logo | God? | Inventor | 3 | 23-01-2003 11:08 |
| Need Dxf file for the first logo | Kautz | Inventor | 3 | 05-12-2002 16:17 |