pic: FRC488 - Six Wheel Drive Chassis

[Madison]

Originally Posted by Rich Kressly

Who keeps letting him in? Security!!!

I love the simple approach to the 6-wheel drive. I'll be follwing up later if you use this to see what additional stiffening was used/needed. Good luck.

I took Dave's advice and added the fourth wall to the front and rear cross members as a start. Because these drivetrains are almost never operating absent some additional mechanism or superstructure, I try to incorporate those future additions into the design and allow for them to be used as support for the drive in the same way that the drive supports the mechanisms, if that makes sense. I try to design such that the finished robot appears organic -- not as if it was designed in pieces that were smashed together later.

Because of the holidays primarly, we haven't really done much of anything with our mecanum drive prototype. It still has no feedback system installed and remains difficult to drive. Most of the team agrees that, unless it appears to be a perfect solution for the new game, we'll stick with something more traditional like this drive, so there's a good chance you'll be seeing it somewhere.