|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: pic: Height on top of a tube
Quote:
If 3 mentors were on TWO tubes laid side-by-side, would they be higher than 4 inches then? |
|
#17
|
||||
|
||||
|
Re: pic: Height on top of a tube
Quote:
Sad thing is, it's true. |
|
#18
|
||||
|
||||
|
Re: pic: Height on top of a tube
As per team update #1
Quote:
Hmm, now what? |
|
#19
|
||||
|
||||
|
Re: pic: Height on top of a tube
Quote:
7.3.6 Not allowed to sit on tube. almost every team hates to hear this ![]() |
|
#20
|
||||
|
||||
|
Re: pic: Height on top of a tube
<G08> Obtaining GAME PIECES - ROBOTS may obtain GAME PIECES via any of the following methods:Accepting a KEEPER prior to the start of the match as detailed in Rule <G04>Picking up RINGERS from the opposing ALLIANCE HOME ZONE that were placed there prior to the start of the match Grasping RINGERS or SPOILERS that have been placed in the CHUTE by the HUMAN
PLAYER Picking up RINGERS or SPOILERS from the playing field surface Removing a SPOILER from a HANGING position on the RACK if a tube is a field element then you could not grab it. do to rule G33> Field interaction - ROBOTS may push or react against any elements of the field, provided there is no damage or disruption of the field elements. ROBOTS may not grab, grasp, grapple, or attach to any field structure. If a ROBOT violates this rule, the head referee will give one warning. If the referee determines that the TEAM is disregarding the warning, their ROBOT will be disabled for the remainder of the match. So the tube is a game piece and would fall under those rules and not the element rules. So if you drop one tube on another, that is not herding because you only had one tube on your robot at a time. then if you climb on one tube you still have not touched both tubes this will get you up over the 12" unless they make a new rule I think this would work. "Sorry did not look at the update" Last edited by Mike Norton : 10-01-2007 at 13:01. Reason: update |
|
#21
|
|||||
|
|||||
|
Re: pic: Height on top of a tube
Quote:
Oh well. ![]() |
|
#22
|
||||
|
||||
|
Re: pic: Height on top of a tube
Personally, I feel this rule is a good one because it will create less controversy. Plus it will challenge us more to create robots that will be able to get those extra bonus points.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tube Dimensions | JohnBoucher | Kit & Additional Hardware | 5 | 18-01-2007 22:16 |
| Vacuum tube. | Eric Scheuing | Kit & Additional Hardware | 11 | 13-01-2007 14:04 |
| pic: Top Gun Top Wheels | Rick TYler | Robot Showcase | 4 | 04-02-2006 11:13 |
| pic: 3/4 of our full height | Matt_Kitts | Robot Showcase | 2 | 23-02-2005 12:20 |
| Dimension Wanted - BOM Caster: floor to top plate surface height | kmcclary | Kit & Additional Hardware | 2 | 28-01-2004 12:02 |