36mm BaneBots Gearmotor Model

[Madison]

Does anyone have a model or drawings of the 36mm RS540 Gearmotor that was provided in the 2007 KoP? I thought that there were drawings of the motors available on the BaneBots site, but I can't seem to find them now.

I'm not sure if this model is included in the virtual kit of parts, as I use Solidworks and can't open the Inventor files.

If someone has a moment to send me an IGES model or the dimensions so that I can model and share it myself, I'd be very appreciative.

Thanks.

[Madison]

Originally Posted by Alex Cormier

http://www.chiefdelphi.com/forums/sh...light=banebots

I'm hoping to find a model of the smaller, 36mm gearmotor.

[Alex Cormier]

Originally Posted by M. Krass

I'm hoping to find a model of the smaller, 36mm gearmotor.

i noticed afterwards. he will probably also draw that one up also.

[chris31]

I dont do much CAD, but couldnt someone download the virtual KOP, take the inventor file and turn it into an IGES and then post it for you? If its that simple ill get out CAD guy to do that for you.

[Madison]

Originally Posted by chris31

I dont do much CAD, but couldnt someone download the virtual KOP, take the inventor file and turn it into an IGES and then post it for you? If its that simple ill get out CAD guy to do that for you.

If the model is included in the VKoP and the folks at Autodesk don't mind, that would work.

[Ed Sparks]

I'll be posting it tonight along with a few other parts.