36mm BaneBots Gearmotor Model

Madison · #1 09-01-2007, 18:31

Quote:

Originally Posted by Alex Cormier

http://www.chiefdelphi.com/forums/sh...light=banebots

I'm hoping to find a model of the smaller, 36mm gearmotor.

Alex Cormier · #2 09-01-2007, 18:32

Quote:

Originally Posted by M. Krass

I'm hoping to find a model of the smaller, 36mm gearmotor.

i noticed afterwards. he will probably also draw that one up also.

chris31 · #3 09-01-2007, 18:36

I dont do much CAD, but couldnt someone download the virtual KOP, take the inventor file and turn it into an IGES and then post it for you? If its that simple ill get out CAD guy to do that for you.

Madison · #4 09-01-2007, 18:39

Quote:

Originally Posted by chris31

I dont do much CAD, but couldnt someone download the virtual KOP, take the inventor file and turn it into an IGES and then post it for you? If its that simple ill get out CAD guy to do that for you.

If the model is included in the VKoP and the folks at Autodesk don't mind, that would work.

Ed Sparks · #5 10-01-2007, 07:35

I'll be posting it tonight along with a few other parts.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using two CIMs in the Banebots Transmission	Justin M.	Technical Discussion	15	09-01-2007 09:41
2007 BaneBots 52mm Gearbox is posted !	Ed Sparks	Inventor	3	09-01-2007 07:38
pic: When One BaneBots Doesn't Do	team222badbrad	Robot Showcase	7	07-03-2006 10:20
BaneBots Gearmotor Model (Inventor 8)	petek	Inventor	1	06-02-2006 21:55
My First 3d Model	Mike	3D Animation and Competition	3	26-03-2005 17:35