Stock Chassis Problem!!

Andrew Blair · #1 09-01-2007, 19:37

Yeah, trouble is, as I remember, the KOP checklist stated that the included bearings were to be 3/8" ID, but the actual ones are 1/2" ID. And the Kitframe has 3/8" ID axle holes, so teams will have to be creative, or order some non-standard 3/8" bearings.

MrForbes · #2 09-01-2007, 22:42

Or look at this thread....

http://www.chiefdelphi.com/forums/sh...ad.php?t=51207

pfreivald · #3 11-01-2007, 15:15

Anyone know where to get more of the wheels pictured (as in, the kit wheels from last year or the year before)?

MrForbes · #4 11-01-2007, 15:17

they are not the same as last year, and you can get them from Andymark

http://www.andymark.biz/firstwheels.html

pfreivald · #5 12-01-2007, 07:29

Ok, thanks.

roborat · #6 12-01-2007, 07:38

If you are talking about the wheels from the last couple of years supplied in the kit, they came from skywheels. This year seems to be a lot better wheel with a great difference in traction.

Lil' Lavery · #7 12-01-2007, 08:14

Quote:

Originally Posted by roborat

If you are talking about the wheels from the last couple of years supplied in the kit, they came from skywheels. This year seems to be a lot better wheel with a great difference in traction.

Skyway actually
http://www.skywaywheels.com/

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Frame...	Herbie698	Technical Discussion	21	11-03-2005 20:16
Stock transmission	sj31419	Technical Discussion	2	17-02-2005 21:51
Stock transmission	sj31419	Electrical	2	17-02-2005 21:51
Key Stock?	dddriveman	Technical Discussion	6	12-02-2004 23:50
2 mm key stock	Andrew	Technical Discussion	8	03-02-2003 22:29