|
|
|
 The toughest part about that Chairman's Award was the fact that someone was cutting onions in the stands near 558/on the field while it was being read out. At least that was the excuse I'm going to use ;) - esquared [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
servo on AM shifter
has anybody used the servos to shift their andymark gearboxes?
do they shift fast? how reliable are they? |
|
#2
10-01-2007, 16:38
|
||||
|
||||
|
Re: servo on AM shifter
AndyMark sells them directly (http://andymark.biz/am-0085.html), so I assume they would be pretty good. I'm sure they were put through all sorts of testing before they were offered for sale.
If you're looking to get numbers on them, you can probably contact AndyMark and ask them. |
|
#3
18-01-2007, 11:29
|
|||
|
|||
|
Re: servo on AM shifter
i developed a servo shifter for the AM tranny last season and it made it through the season without and glitches. shifting is slightly slower the pneumatics but you are using a lot less force to shift. the upside its you can lose a lot of weight in pneumatics if you only need it to shift.
|
|
#5
18-01-2007, 13:46
|
||||||
|
||||||
|
Re: servo on AM shifter
The following post gives some good info from Andy: http://www.chiefdelphi.com/forums/sh...16&postcount=8
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Showdown: Shifter type | CraigHickman | Technical Discussion | 7 | 21-04-2006 08:37 |
| AM Shifter 2 question | ForgottenSalad | Technical Discussion | 2 | 20-02-2006 14:26 |
| Servo shifter for AndyMark transmissions | Robby | Technical Discussion | 3 | 17-01-2006 01:41 |
| AndyMark shifter feedback | Max Lobovsky | Technical Discussion | 1 | 11-01-2006 22:26 |
| Servo behavior question / advanced servo/PIC programming question | DanL | Electrical | 12 | 18-10-2005 18:33 |
Linear Mode
