sprockets

[Kilroy0846]

Ok doing a little more research, and with the help of Gurdian's advice i was able to come up with these

For the input sprocket that comes off of the planetary gearbox:

Sprocket 15 tooth; 35 Chain
MSC
http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=16269339
Grainger
http://www.grainger.com/Grainger/wwg...mId=1611578574


And the Sprocket that is bolted to the wheels:
#35 chain, 1.25” bore, 1/4” hub, #10 mntg
holes in a 1.875” D circle
MSC
http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=16269485
This one will need holes drilled in it.

[Justin M.]

IMO, I think it would just be easier to get the IFI/AndyMark Aluminum sprockets.

1) It's lighter
2) It bolts right up to the KOP/AndyMark and IFI Traction wheels.

The only problem is the smallest is 28t, the ones in the kit are 24t. Since you increased the tooth counting by 4, then do the same for the smaller one, so get a bigger one for the shaft. Or you can just get a custom better geardown for your own situation (more torque, more speed).

[DavidGitz]

Originally Posted by Justin M.

The only problem is the smallest is 28t,

They have 24 teeth now too.