CMU2Cam Degrees & more

[itsme]

Originally Posted by JSonntag

It has a rotation of approximately 90 degrees

http://www.servocity.com/html/hs-322...rd_deluxe.html

So this means that each PWM is 256/90=2.8444... degrees.
And each degree is 90/256=0.3515625 degrees.

:::EDIT:::
It's not 90 degrees for sure, you can buy one with 180 degrees and one with 360 degrees.
So can anybody tell how much degrees it is in the FIRST kit of parts?

[Greg Marra]

Or, you can always drive the servo to 0, mark its position, drive it 255, mark its position, and then bust out a protractor.

We did a lot of testing to find the camera field of view and servo ranges in 2005. If I find them later, I will post them, although they may not be exactly the same.

[TEAM1949]

http://www.acroname.com/robotics/inf.../mod322hd.html

look at 'step 4', first two lines


more than 180:
http://www.phidgetsusa.com/forums/ar...php?t-553.html

[jdejoannis]

Originally Posted by Greg Marra

Or, you can always drive the servo to 0, mark its position, drive it 255, mark its position, and then bust out a protractor.

We did a lot of testing to find the camera field of view and servo ranges in 2005. If I find them later, I will post them, although they may not be exactly the same.

How do you drive the servos? This would be very useful for us to debug something.

Jason

[Donut]

Originally Posted by Lablabla

Hi,
I'm Using the streamlined version downloaded for kevin.org/frc
Is there a way to find out the degrees the pan and tilt are in relation to the horizontal and vertical zeros? (i.e camera looking straight forward)

In Kevin's code he lists the degrees for each range if using the pan/tilt mechanism for FIRST in tracking.h (for example, the pan servo goes from 0 to 248, and has a total range of 130 degrees). To determine the value your 0's are at, you will have to manually control the camera until it is in the position you want to be considered "center".

Originally Posted by jdejoannis

How do you drive the servos? This would be very useful for us to debug something.

The servos are driven with standard pwms, so instead of having the camera code create the pan & tilt pwms, have a joystick control the value of the pwm. Comment out servo_track() so the camera has no control of the servos, then do pwm01 = p1_y (with whatever pwms and joystick you want to use inserted there).

[Kevin Watson]

Originally Posted by jdejoannis

How do you drive the servos? This would be very useful for us to debug something.

Jason

If you're using the "bells & whistles" camera code, you can step the servos to any value using the interactive PWM sub-menu found in the main tracking menu.

-Kevin

[jdejoannis]

Great, thanks!

[Bomberofdoom]

So in order to find the range from, for example, the rack, I need to calculate the # of degrees to the target from the servos and then calculate Tan(the angel)and devide the hight of the target from the camera by the Tan(angel)?

[Branden Ghena]

Yes, that should work.

ps angle is spelled le

[Bomberofdoom]

When you type as fast as I do, you'd probablly get the 15 minute delay for writing a long password too fast 5 times and get a wrong password error.
Thanks.