Who has the tidiest wiring?

[AdamHeard]

Since you guys are not powering the front wheels, you should probably swap them out for something with less traction.

The Andymark 6" Omnis would work well.



Also, the rules aren't exactly clear, but it looks as though the DIN rails are required. Check the best practices and the electronics manual linked under section 8 of the manual on the usfirst site.



Also, those panels posted above with the white wires are 254's.

[Bochek]

Originally Posted by AdamHeard

Since you guys are not powering the front wheels, you should probably swap them out for something with less traction.

The Andymark 6" Omnis would work well.



Also, the rules aren't exactly clear, but it looks as though the DIN rails are required. Check the best practices and the electronics manual linked under section 8 of the manual on the usfirst site.



Also, those panels posted above with the white wires are 254's.

We are swapping to 4wd, just waiting for the parts to arrive.

-Bochek

[Cuog]

Those wires right in front of the Victor fans really worry me. With as little airflow as that last victor would get, magic smoke may make a debut.

[Bochek]

Originally Posted by Cuog

Those wires right in front of the Victor fans really worry me. With as little airflow as that last victor would get, magic smoke may make a debut.

actually the wires are above the victors.

there is a clear channel for air to travel and we will be adding a large fan at the end to flow air down the channel.

- Bochek

[Cuog]

OK good, from that angle it looked bad, but as long as your taking everything into account