What Weight Class is Your Robot? - Page 2

JamesBrown · #16 13-01-2007, 02:03

Quote:

Originally Posted by AtalanteStar25

As I said, you can expand as far as you want as long as you remain in your home zone.

but in order to score on the rack you would need to extend out of the home zone. with a 16 ft arm, to have it attached to the robot and posistioned at an angle that will only reach ~8 ft vertical, the height of the tallest goal, the arm would be extending horizontally well over 6 feet this would violate the rule.

I don't think 1568 has made up their minds yet, but I know I dont want to give up 10 or 20 pounds if I dont have too.

James

Justin M. · #17 14-01-2007, 01:59

Right now the plan is 5'/110lbs. The forklift system will be made with all 5' pieces of 80/20. After it's built, we will cut it down if we need to, and lighten some parts as well. CAD is nice, but then again some parts of the robot need to be built and adjusted in person, with the actual robot functioning.

Spark Hawk · #18 14-01-2007, 13:20

4 Feet. We're paranoid about weight, so we needed the leeway.

MrForbes · #19 14-01-2007, 13:40

Quote:

Originally Posted by Billfred

Who said we were done designing?

exactly!

Dancing_Chuck · #20 14-01-2007, 14:36

Wait, we're building a robot?...

Zoheb N · #21 14-01-2007, 14:37

We are building our robot to be 4' 120lbs

Conor Ryan · #22 14-01-2007, 16:13

They call it First Class for a reason...

NoSkaOnTheRadio · #23 14-01-2007, 21:39

team 1757's shooting for 4' 120lbs.

...which should be a little easier this year, seeing as we're not using plywood as our main building material!

macwhoo · #24 15-01-2007, 17:09

Rookie question- Home zone is the space directly up/down/around YOUR robot, right? Does the arm (if you are using one) once extended count into the height/weight limitations?

EricH · #25 15-01-2007, 17:11

Quote:

Originally Posted by macwhoo

Rookie question- Home zone is the space directly up/down/around YOUR robot, right? Does the arm (if you are using one) once extended count into the height/weight limitations?

No. Home Zone is the area at the ends of the field this year. And yes, the arm in starting position counts for weight/height limits. Once extended, it has to be in the boxes specified.

RichardJames · #26 15-01-2007, 17:12

We're aiming at having a multiple-tiered forklift (I think) so we'll be 4' 120lbs

macwhoo · #27 15-01-2007, 17:16

Oh, ok. So you could have a 4' robot in starting position and an extended arm length that can reach to about 9' and still be only in the 4' weight class?

EricH · #28 15-01-2007, 18:38

Quote:

Originally Posted by macwhoo

Oh, ok. So you could have a 4' robot in starting position and an extended arm length that can reach to about 9' and still be only in the 4' weight class?

As long as that arm doesn't go over 6' horizontally, you're fine.

View Poll Results: WHAT WEIGHT CLASS IS YOUR ROBOT?
1st Class (48" and 120 lbs.)	127	70.95%
2nd Class (60" and 110 lbs.)	28	15.64%
3rd Class (72" and 100 lbs.)	6	3.35%
We'll see when we get there...	18	10.06%
Voters: 179. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What does your robot go for	Dominicano0519	Programming	0	07-03-2006 18:26
easy way to find your robot weight.	Tytus Gerrish	Technical Discussion	22	19-09-2005 21:55
What scales to weight robot?	chocolateluvrlr	General Forum	41	08-04-2005 21:43
What does your robot do?	Squeje250	General Forum	11	22-02-2005 10:18
What does your robot really do?	Scooter	General Forum	5	26-02-2004 23:26