|
|
|
 - Only think of Gracious Professionalism as a standard to work toward personally.
- Never use it as a gauge to point out someone else’s shortcomings. - Rich Kressly [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| - Only think of Gracious Professionalism as a standard to work toward personally.
- Never use it as a gauge to point out someone else’s shortcomings. - Rich Kressly [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
14-01-2007, 21:42
|
|||||
|
|||||
|
Re: Custom PWM Cables and R69
Try http://www.chiefdelphi.com/forums/sh...5&postcount=26, good source for pins and bodies.
For 24 ga or 22 ga 3-conductor wire (made by HiTec), search eBay for "Servo Wire", or any R/C hobby shop will have it or can get it in a few days. About $15 for 50 feet. Radio Shack sells a crimper - 276-1595 - that crimps these pins perfectly. $11. Don |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PWM Cables | Alex Cormier | FIRST Tech Challenge | 15 | 13-08-2006 09:48 |
| PWM Cables | zachriggle | Electrical | 3 | 04-02-2006 13:54 |
| Bad Pwm cables | Greg Needel | Electrical | 7 | 18-01-2006 23:13 |
| victors spikes and pwm cables | sburro | Electrical | 3 | 23-02-2005 02:24 |
| The PWM Cables | amateurrobotguy | General Forum | 1 | 22-02-2005 17:42 |
Threaded Mode