|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
|
||||
|
||||
|
Re: Vacuum Valve
What you need is a non-air piloted valve. MAC Valves 35 series would work well for what i suspect you are doing.
I havn't looked at this year's rules, but in previous year's i don't remember anything prohibiting this setup. The problem with the valves in the kit is that they are air piloted, that is they use a small internal valve to actuate a larger valve that actually controls the flow of air. Unfortunately, the pilot will not work off vacuum. Some piloted valves allow for the pilot to be driven from a dedicated positive pressure supply. I do no beleive that any of the valves in the kit can be adapted for external pilot supply. For an animation of how an air-piloted valve works, see the front page of www.macvalves.com Last edited by Rickertsen2 : 16-01-2007 at 21:33. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Vacuum tube. | Eric Scheuing | Kit & Additional Hardware | 11 | 13-01-2007 14:04 |
| Vacuum Generator | Peter Matteson | Pneumatics | 0 | 04-02-2005 15:58 |
| Vacuum Generator | Peter Matteson | Technical Discussion | 0 | 04-02-2005 15:58 |
| Vacuum | NoRemorse | Rules/Strategy | 25 | 22-01-2004 12:34 |
| Vacuum | nwagers | Pneumatics | 16 | 31-10-2003 15:57 |